Chevrolet Trax Code 73: Meaning, Causes, and How to Fix the AWD Warning

If your Chevrolet Trax suddenly displays Code 73 on the dashboard, you might wonder whether the problem is serious, whether you can continue driving, or how much the repair could cost.
The good news is that Code 73 does not automatically mean your transmission or all-wheel-drive system has suffered a major mechanical failure. In many cases, the warning is related to an electrical fault, a control module issue, or a communication problem within the AWD system.
However, ignoring the warning is not a good idea, particularly if you regularly drive on slippery roads or in difficult weather conditions.
In this guide, we'll explain what Chevrolet Trax Code 73 means, why it appears, how to diagnose the problem, and which repairs may restore normal operation.
- What Does Code 73 Mean on a Chevrolet Trax?
- Which Chevrolet Trax Models Can Display Code 73?
- What Causes Chevrolet Trax Code 73?
- 1. Faulty Rear Differential Control Module
- 2. Corroded Wiring or Electrical Connectors
- 3. AWD Control Module Software Problems
- 4. Rear Differential Clutch Problems
- 5. Low Battery Voltage or Electrical Supply Problems
- 6. Wheel Speed Sensor or Communication Problems
- 7. Incorrect Tire Sizes or Temporary AWD Disabling
- Chevrolet Trax Code 73 Symptoms
- How to Fix Chevrolet Trax Code 73
- Step 1: Confirm the Warning Message
- Step 2: Safely Restart the Vehicle
- Step 3: Check the Battery and Electrical Connections
- Step 4: Scan the AWD System for Fault Codes
- Step 5: Inspect the Rear Differential Module and Wiring
- Step 6: Check for Software Updates
- Step 7: Repair the Fault and Verify AWD Operation
- Chevrolet Trax Code 73 vs Code 173: What's the Difference?
- Is It Safe to Drive a Chevrolet Trax With Code 73?
- How Much Does It Cost to Fix Chevrolet Trax Code 73?
- Can You Reset Chevrolet Trax Code 73?
- How to Prevent Chevrolet Trax AWD Problems
- Common Mistakes When Dealing With Chevrolet Trax Code 73
- Frequently Asked Questions About Chevrolet Trax Code 73
- Conclusion: What Should You Do When Chevrolet Trax Code 73 Appears?
What Does Code 73 Mean on a Chevrolet Trax?
Chevrolet Trax Code 73 means "Service All Wheel Drive System."
This warning appears in the Driver Information Center (DIC) when the vehicle detects a problem affecting the operation of its all-wheel-drive system.
The AWD system normally distributes engine power between the front and rear wheels when additional traction is necessary.
When Code 73 appears, the system may disable power delivery to the rear wheels and operate the vehicle in front-wheel-drive mode.
In other words, the Trax may continue moving normally, but the additional traction provided by AWD may no longer be available.
Chevrolet Trax Code 73 Quick Overview
| Item | Explanation |
|---|---|
| Dashboard message | Code 73 |
| Meaning | Service All Wheel Drive System |
| Affected system | All-wheel drive |
| Possible consequence | AWD becomes unavailable |
| Common causes | Control module, wiring, communication, or electrical faults |
| Can you drive? | Sometimes, with precautions |
| Recommended action | Diagnose the AWD system promptly |
An important detail is that Code 73 is a dashboard message, not a standard OBD-II diagnostic trouble code.
A technician may need a diagnostic scanner capable of communicating with the AWD control module to identify the underlying fault.
Which Chevrolet Trax Models Can Display Code 73?
Code 73 is primarily associated with earlier Chevrolet Trax models equipped with AWD.
Depending on the country and model year, Chevrolet offered the first-generation Trax with either front-wheel drive or all-wheel drive.
| Chevrolet Trax model | Code 73 relevance |
|---|---|
| 2013–2014 Trax | Relevant to AWD-equipped versions in markets where offered |
| 2015–2016 Trax | Relevant to AWD-equipped versions |
| 2017–2018 Trax | Relevant to AWD-equipped versions |
| 2019–2022 Trax | Relevant where the vehicle uses the applicable AWD warning system |
| 2024 and newer US-market Trax | Not normally applicable because these models are FWD-only |
The redesigned Chevrolet Trax sold in the United States from the 2024 model year uses front-wheel drive rather than the older AWD arrangement.
Therefore, the interpretation of Code 73 is especially relevant to older AWD-equipped vehicles.
If you own a front-wheel-drive Trax and encounter an unfamiliar warning, verify the exact message in the owner's manual for your model year and country.
What Causes Chevrolet Trax Code 73?
Several problems can trigger Code 73. Some involve relatively simple electrical issues, while others require professional diagnosis or replacement of components.
1. Faulty Rear Differential Control Module
One of the possible causes is a malfunctioning rear differential control module.
This electronic component manages the operation of the rear differential clutch and determines when engine torque should be transferred to the rear wheels.
If the module stops responding correctly, the vehicle may disable AWD and display Code 73.
Potential problems include:
- Internal electronic failure.
- Incorrect software operation.
- Water intrusion or corrosion.
- Communication interruptions.
- Faulty electrical connections.
On certain earlier models, General Motors documented AWD warning messages associated with a software anomaly in the rear differential control module.
That means replacing expensive mechanical components is not always necessary.
2. Corroded Wiring or Electrical Connectors
Electrical corrosion is another important possibility, especially on older vehicles exposed to winter road salt, moisture, or wet driving conditions.
The AWD control system relies on electrical connections between sensors, modules, and the vehicle's communication network.
When those connections become damaged, the system may lose the information required to operate correctly.
Possible symptoms include intermittent AWD warnings, warning lights appearing after wet weather, or multiple electronic faults occurring together.
Some Chevrolet Trax models have been covered by technical service information concerning corrosion affecting the rear differential clutch control module.
A proper inspection should therefore include the module housing, wiring harness, and connectors.
3. AWD Control Module Software Problems
Not every Code 73 warning results from a physically damaged component.
You might be interested in this content.
Are Chevrolet Trax Reliable in Canada? Complete Reliability and Ownership GuideIn some circumstances, software can cause the AWD module to behave incorrectly.
General Motors issued Service Bulletin PI1176A in May 2014 for certain 2013–2014 Chevrolet Trax AWD vehicles sold in Canada.
The bulletin described Code 73 and Code 173 messages potentially caused by a software anomaly in the rear differential control module.
For affected vehicles, the recommended correction involved reprogramming the module with updated software after following the specified diagnostic procedure.
This does not mean every Chevrolet Trax displaying Code 73 requires an update.
However, checking for applicable technical service bulletins is a worthwhile step before replacing expensive parts.
4. Rear Differential Clutch Problems
The Chevrolet Trax AWD system uses an electronically controlled clutch to distribute torque to the rear wheels.
If the clutch circuit or its control components develop a fault, the system may no longer operate correctly.
Possible issues include an open electrical circuit, a short circuit, or a malfunction within the clutch-control assembly.
A technician may need to test the wiring and electrical operation of the clutch to determine whether the problem is electronic or mechanical.
5. Low Battery Voltage or Electrical Supply Problems
Modern vehicles depend on stable electrical power to operate their control modules.
If battery voltage falls outside the expected operating range, an electronic module may record a fault or stop communicating correctly.
Possible contributing factors include:
- A weak battery.
- Charging-system problems.
- Corroded battery terminals.
- Poor grounding connections.
- Damaged wiring or power circuits.
If Code 73 appears alongside several unrelated electrical warnings, checking battery and charging-system health is a reasonable early diagnostic step.
Nevertheless, replacing the battery without testing is unlikely to solve every AWD-related fault.
6. Wheel Speed Sensor or Communication Problems
The AWD system uses information from other vehicle systems, including wheel speed and electronic stability control.
When the required information is unavailable or incorrect, AWD operation may be restricted.
For example, a communication problem between the electronic brake control module and the rear differential control module may contribute to an AWD warning.
A diagnostic scan can help distinguish a sensor or communication fault from a failure inside the AWD control module itself.
7. Incorrect Tire Sizes or Temporary AWD Disabling
The Chevrolet Trax AWD system is sensitive to differences in wheel rotation.
Using tires of significantly different sizes, or installing a compact spare tire, can cause the vehicle to disable AWD to protect its drivetrain.
However, this situation is more directly associated with an AWD Off message or Code 173, rather than a confirmed Code 73 malfunction.
If the warning appeared after replacing tires, check that all installed tires meet the manufacturer's specifications.
Chevrolet Trax Code 73 Symptoms
Although the warning itself is usually the most noticeable symptom, other changes may appear depending on the underlying problem.
AWD System Stops Working
The most obvious consequence is the loss of all-wheel-drive assistance.
On dry pavement, the difference may be difficult to notice during normal driving.
However, when accelerating on snow, gravel, mud, or slippery roads, reduced traction may become more apparent.
Warning Appears and Disappears
Sometimes Code 73 appears intermittently.
You may notice that the warning disappears after restarting the vehicle but returns later.
This pattern can indicate an intermittent electrical connection, a module communication problem, or another condition that is not continuously present.
You might be interested in this content.
How Long Can a Chevy Trax Last in Canada? Mileage, Lifespan & Reliability GuideThe disappearance of the warning does not necessarily mean the issue has been permanently resolved.
Additional Dashboard Warnings
Some vehicles may display other messages alongside the AWD warning.
These can include:
- Check Engine light.
- ABS warning.
- Traction control warning.
- Stability control warning.
- Electrical system warnings.
Multiple warning lights do not automatically mean several components have failed. One electrical or communication issue can sometimes affect multiple systems.
Unusual Driving Behavior
Depending on the fault, you might notice changes in traction or vehicle stability.
A mechanical problem may also produce unusual noises or vibrations.
If you experience severe vibration, grinding noises, steering difficulties, or other major driving problems, stop safely and arrange professional assistance.
How to Fix Chevrolet Trax Code 73
The correct repair depends on the actual cause. We recommend following a structured diagnostic process rather than replacing parts at random.
Step 1: Confirm the Warning Message
First, verify that the dashboard is displaying Code 73 rather than Code 173 or another message.
Code 73 indicates a service-related AWD fault, while Code 173 indicates that AWD is off.
The distinction matters because a temporary AWD shutdown may not require the same repair as a detected malfunction.
Record any other warning messages that appear at the same time.
Step 2: Safely Restart the Vehicle
If the Chevrolet Trax is otherwise operating normally, stop in a safe location, switch off the engine, and restart it.
Check whether Code 73 appears again.
A temporary electrical or communication interruption may no longer be active after restarting.
However, restarting the vehicle is not a guaranteed repair.
If the warning returns, further diagnosis is necessary.
Step 3: Check the Battery and Electrical Connections
Inspect the battery terminals for visible corrosion, loose connections, or damage.
If you have the appropriate equipment, test battery condition and charging-system operation.
A professional technician can also check whether the AWD module is receiving the correct power supply and ground connections.
Do not disconnect or manipulate electrical components while the vehicle is running.
Step 4: Scan the AWD System for Fault Codes
This is one of the most important steps.
A basic OBD-II scanner may read engine-related codes but fail to communicate with the AWD control module.
For a complete diagnosis, use a compatible scan tool that can access chassis, drivetrain, and relevant control modules.
The scan may identify:
- Rear differential control module faults.
- Lost communication with an electronic module.
- Incorrect electrical voltage.
- Clutch-control circuit problems.
- Related brake or stability-control faults.
Always record the diagnostic trouble codes before clearing them.
Code 73 alone does not identify which component needs replacement.
Step 5: Inspect the Rear Differential Module and Wiring
If the scan points toward the rear differential control module, inspect the component and its associated electrical connections.
Look for signs of moisture intrusion, corrosion, damaged wiring, or loose connectors.
Depending on the diagnostic findings, the repair may involve wiring restoration, connector repair, or module replacement.
You might be interested in this content.
Chevrolet Trax vs Equinox Canada: Which SUV Should You Buy?Because the module is part of a specialized drivetrain system, diagnosis and replacement are generally best handled by a qualified technician.
Step 6: Check for Software Updates
For applicable Chevrolet Trax models, ask a Chevrolet dealer or qualified repair facility to check whether a relevant software update or technical service bulletin applies.
In particular, certain early Canadian-market AWD vehicles were covered by a bulletin addressing Code 73 and Code 173 through control-module software reprogramming.
Programming requires the correct diagnostic equipment and vehicle-specific software.
Step 7: Repair the Fault and Verify AWD Operation
Once the underlying issue has been repaired, the technician should clear the applicable fault codes and check for their return.
A road test may be necessary to confirm that the AWD warning stays off and the system operates as intended.
Do not assume a repair was successful simply because the dashboard message disappeared.
Chevrolet Trax Code 73 vs Code 173: What's the Difference?
These two messages are closely related, but they do not mean exactly the same thing.
| Feature | Code 73 | Code 173 |
|---|---|---|
| Meaning | Service AWD System | AWD Off |
| Main indication | AWD malfunction detected | AWD has been disabled |
| Possible causes | Electrical, module, clutch, or communication faults | Temporary operating conditions or system faults |
| AWD availability | May be unavailable | Unavailable while disabled |
| Recommended action | Diagnose and repair | Check operating conditions; diagnose if persistent |
Code 173 may appear when the system temporarily disables AWD because of excessive wheel spin, temperature-related protection, or certain tire conditions.
Code 73 more directly indicates that the AWD system requires diagnostic attention.
Nevertheless, some faults can produce either warning, so a scan is essential when the problem persists.
Is It Safe to Drive a Chevrolet Trax With Code 73?
In some cases, yes. If Code 73 is the only warning and the vehicle's steering, braking, engine, and transmission appear to work normally, the Trax may remain driveable using front-wheel drive.
However, there are important precautions.
First, do not assume AWD is functioning. The vehicle may have significantly less traction when accelerating on slippery surfaces.
Second, avoid aggressive acceleration, difficult terrain, and demanding road conditions until the issue has been diagnosed.
Third, pay attention to additional warning lights.
If Code 73 appears together with a loss of power steering assistance, braking problems, severe mechanical noises, or unpredictable handling, stop driving as soon as it is safe and arrange recovery.
We would not recommend taking a long trip in severe winter conditions with an unresolved AWD fault.
How Much Does It Cost to Fix Chevrolet Trax Code 73?
Repair costs vary considerably because Code 73 identifies the affected system rather than a specific defective part.
A software update or relatively minor wiring repair may cost substantially less than replacing an AWD control module or mechanical differential component.
| Possible repair | General cost consideration |
|---|---|
| Diagnostic scan | Usually a relatively modest initial expense |
| Battery or terminal repair | Often lower cost than drivetrain repairs |
| Wiring or connector repair | Depends on accessibility and corrosion |
| AWD module software update | Depends on dealer programming charges |
| Rear differential control module replacement | Potentially more expensive due to parts and programming |
| Differential or clutch repair | Can involve significant parts and labor costs |
Actual prices depend on your country, model year, local labor rates, available replacement parts, and diagnostic findings.
Before authorizing an expensive repair, ask the mechanic to explain which diagnostic codes were found and which tests confirmed the failed component.
Can You Reset Chevrolet Trax Code 73?
You may be able to clear the warning by resolving the underlying problem and clearing the relevant diagnostic trouble codes with a compatible scan tool.
However, there is no universal dashboard-button procedure that permanently fixes Code 73.
Pressing the DIC controls to acknowledge a message does not repair the AWD system.
Similarly, disconnecting the battery simply to erase the warning is not a recommended diagnostic solution.
If the original fault remains active, the warning may return.
The correct approach is to identify the cause, complete the repair, and verify that the relevant fault codes do not reappear.
How to Prevent Chevrolet Trax AWD Problems
Although not every electronic fault is preventable, several maintenance habits can reduce the likelihood of AWD-related issues.
Keep Tires Properly Matched
Use tires that meet the manufacturer's size and specification requirements.
You might be interested in this content.
Chevrolet Trax Tire Pressure: Recommended PSI, TPMS Reset, and Complete GuideAvoid significant differences in tire rolling circumference, which can interfere with the operation of AWD systems.
Maintain the Battery and Charging System
A reliable electrical supply is important for the operation of electronic control modules.
Have the battery tested when starting performance deteriorates or electrical warnings begin appearing.
Address Electrical Corrosion Early
If you live in a region with salted roads or frequent moisture exposure, pay attention to corrosion affecting underbody components.
Professional inspections can help detect damaged wiring or connectors before more serious problems develop.
Follow the Recommended Maintenance Schedule
Follow Chevrolet's maintenance recommendations for your particular model year and drivetrain.
If you notice drivetrain leaks, unusual noises, or warning messages, investigate them promptly.
Avoid Ignoring Intermittent Warnings
A warning that appears only occasionally can still indicate a developing fault.
Early diagnosis may prevent a minor electrical issue from becoming a more expensive repair.
Common Mistakes When Dealing With Chevrolet Trax Code 73
One mistake is assuming that Code 73 means the entire rear differential must be replaced.
The warning can result from electronic problems that do not require replacing major drivetrain components.
Another mistake is confusing Code 73 with Code 173.
Although both messages involve AWD operation, they indicate different system conditions.
Using an engine-only OBD-II scanner is another common problem. Such a scanner may show no engine fault codes even when the AWD module has stored diagnostic information.
Finally, replacing the rear differential control module without checking its wiring, power supply, and communication circuits may fail to address the original fault.
Accurate diagnosis is usually more valuable than guessing which component is defective.
Frequently Asked Questions About Chevrolet Trax Code 73
1. What does Code 73 mean on a Chevy Trax?
Code 73 means "Service All Wheel Drive System." It indicates that the vehicle has detected a problem with its AWD system.
The issue may involve the rear differential control module, electrical wiring, communication circuits, or other AWD components. The vehicle may temporarily operate in front-wheel-drive mode until the fault is corrected.
2. Can I drive my Chevrolet Trax with Code 73 showing?
You may be able to drive cautiously if the vehicle otherwise operates normally and no additional serious warning appears.
However, AWD assistance may be unavailable, reducing traction on slippery roads. Avoid demanding driving conditions and arrange a diagnosis promptly. If steering, braking, or handling is affected, stop driving and seek professional assistance.
3. How do I clear Code 73 on my Chevrolet Trax?
The appropriate method is to diagnose and repair the underlying AWD problem and then clear the corresponding diagnostic trouble codes with a compatible scan tool.
Simply acknowledging the message or disconnecting the battery does not guarantee a permanent solution.
Code 73 primarily concerns the all-wheel-drive system rather than the automatic transmission itself.
Although AWD components form part of the vehicle's overall drivetrain, the warning does not automatically indicate transmission damage.
A complete diagnostic scan is necessary to identify the affected component.
5. Can a weak battery cause Chevrolet Trax Code 73?
A weak battery or unstable electrical supply can contribute to control-module faults and communication problems.
However, Code 73 does not specifically mean the battery is defective. Battery and charging-system tests should form part of the diagnostic process when electrical problems are suspected.
Conclusion: What Should You Do When Chevrolet Trax Code 73 Appears?
Chevrolet Trax Code 73 indicates a problem with the all-wheel-drive system, and it should not be ignored.
Although the warning may initially seem alarming, it does not always mean that an expensive mechanical failure has occurred.
Potential causes range from software anomalies and electrical corrosion to faulty control modules and clutch-control problems.
You might be interested in this content.
Mazda 3 Engine Malfunction: Have the Vehicle Inspected – Causes, Solutions, and Repair CostsOur recommendation is to begin with a proper diagnostic scan, check the electrical system, and inspect the rear differential control module before replacing parts.
If your vehicle is an older AWD-equipped Trax, it is also worth checking whether a manufacturer-issued service bulletin applies to your specific model.
With the correct diagnosis and repair, you can address the warning, restore proper AWD operation where applicable, and regain confidence in your Chevrolet Trax.

Leave a Reply