Hyundai Kona Wiper Blade Size: Complete Year-by-Year Guide

Finding the correct Hyundai Kona wiper blade size sounds like one of those five-minute jobs. Then we start shopping, see several different lengths, attachment types, model years, and rear-blade options, and suddenly a simple maintenance purchase feels like decoding a puzzle.

Fortunately, it does not need to be complicated.

For most first-generation Hyundai Kona models sold from the 2018 through 2023 model years, the commonly listed front windshield wiper combination is 26 inches on the driver's side and 16 inches on the passenger side, with an 11-inch rear blade frequently specified. Multiple fitment sources list this 26/16/11-inch combination for the first-generation Kona.

The situation changes with the redesigned second-generation Kona introduced in North America for the 2024 model year. Current replacement listings commonly specify 26-inch driver and 17-inch passenger blades for 2024–2026 models.

That single inch might look insignificant, but wiper blades behave a little like shoes: close enough is not necessarily good enough. A blade that is too long can collide with another blade or reach beyond the intended windshield area. A blade that is too short leaves part of the glass untouched.

So before clicking "buy," let's determine exactly what your Kona needs.

Hyundai Kona Wiper Blade Size Chart

Here is the quickest starting point for owners shopping for replacement blades.

Hyundai Kona Model Year	Driver Side	Passenger Side	Rear
2018	26"	16"	11"
2019	26"	16"	11"
2020	26"	16"	11"
2021	26"	16"	11"
2022	26"	16"	11"
2023	26"	16"	11"
2024	26"	17"	Verify rear fitment
2025	26"	17"	Verify rear fitment
2026	26"	17"	Verify rear fitment

The 26/16/11-inch setup for 2018–2023 Kona models is consistently listed by several replacement-blade fitment sources.

For the redesigned 2024-generation Kona, aftermarket fitment catalogs commonly move the passenger-side blade to 17 inches, while retaining a 26-inch driver blade.

Still, we recommend confirming fitment using your vehicle identification number, existing blades, Hyundai parts catalog, or the blade manufacturer's compatibility tool. Regional Kona versions, production changes, Electric variants, and attachment designs can create exceptions.

What Size Wiper Blades Does a Hyundai Kona Take?

For a typical 2018–2023 Hyundai Kona, we should look for:

• Driver side: 26 inches or approximately 650 mm
• Passenger side: 16 inches or approximately 400 mm
• Rear window: 11 inches or approximately 280 mm

A replacement listing for early Kona models explicitly identifies the front sizes as 650 mm and 400 mm, equivalent to approximately 26 and 16 inches, along with an 11-inch rear blade.

For many 2024–2026 Kona models, the common front combination becomes:

• Driver side: 26 inches
• Passenger side: 17 inches

That difference is important because the 2024 model year marked the arrival of the second-generation Kona in North America.

Why Does the Model Year Matter So Much?

Automakers redesign windshields, wiper arms, mounting points, and blade geometry between generations.

The first-generation Kona and second-generation Kona may share the same name, but underneath the badge they are not identical vehicles.

Think of it like buying a phone case. Knowing that we own an iPhone is not enough. We need to know which iPhone.

Wiper blades work the same way.

2018 Hyundai Kona Wiper Blade Size

The commonly specified 2018 Hyundai Kona wiper blade size is:

26 inches driver / 16 inches passenger / 11 inches rear.

A dedicated 2018 Kona fitment catalog lists exactly this combination and identifies the front attachment as a small hook configuration.

That means owners should not shop exclusively by blade length. Attachment compatibility matters too.

If the blade is 26 inches but the connector cannot lock onto the Kona's wiper arm, the length becomes irrelevant.

2019 Hyundai Kona Wiper Blade Size

For the 2019 Hyundai Kona, the familiar first-generation dimensions continue:

26-inch driver, 16-inch passenger, and approximately 11-inch rear blade.

Hyundai's 2019 Kona owner's manual also provides procedures for replacing the front windshield wiper blades, reinforcing that blade replacement is a normal owner-maintenance task.

This generation is particularly straightforward because many major aftermarket manufacturers offer direct-fit products.

2019 Kona Electric Wiper Sizes

The Kona Electric belongs to the same broader first-generation Kona family, and numerous aftermarket kits list compatibility with Kona Electric models while using the 26/16/11-inch combination.

However, EV owners should still confirm the precise year and market.

2020 Hyundai Kona Wiper Blade Size

For a 2020 Hyundai Kona, the usual front blade configuration remains:

You might be interested in this content.Hyundai Kona Weight: Curb Weight, Payload and What It Means

26 inches on the driver's side and 16 inches on the passenger side.

Hyundai parts listings for the 2020 Kona identify separate driver- and passenger-side wiper components and show that conventional and hybrid blade configurations were used during this production period.

That gives us an important clue: size alone isn't the entire story.

Blade construction can vary.

Conventional vs Hybrid Wiper Blades

A conventional blade uses an articulated metal or plastic frame to distribute pressure.

A hybrid blade combines characteristics of conventional and beam-style designs, generally adding an aerodynamic outer shell.

Either style can work well when correctly designed for the vehicle.

What matters most is:

1. Correct blade length.
2. Correct arm connection.
3. Proper windshield curvature.
4. Even pressure against the glass.

2021 Hyundai Kona Wiper Blade Size

The 2021 Hyundai Kona generally continues with the same first-generation setup:

26-inch driver and 16-inch passenger blades, with an approximately 11-inch rear blade.

If you're replacing all three simultaneously, buying a vehicle-specific three-piece kit can be convenient.

However, convenience should not replace verification. Product descriptions occasionally group several model years together, and incorrect catalog data does happen.

Before opening the package, compare the replacement blade with the one currently installed.

2022 Hyundai Kona Wiper Blade Size

The common 2022 Hyundai Kona wiper blade size remains:

26 inches driver / 16 inches passenger / 11 inches rear.

Genuine Hyundai parts listings for the 2022 Kona show distinct driver and passenger wiper blade assemblies, demonstrating that the two front blades are not interchangeable components.

That's worth remembering.

We sometimes see owners buy two identical blades because the windshield looks reasonably symmetrical from the driver's seat. It isn't.

The driver's blade is substantially longer because it must clear the largest possible portion of the driver's field of view.

2023 Hyundai Kona Wiper Blade Size

For the 2023 Hyundai Kona, replacement suppliers continue to commonly list:

26-inch driver / 16-inch passenger / 11-inch rear.

Genuine Hyundai parts listings also show separate driver and passenger wiper assemblies for the 2023 Kona.

If your 2023 Kona sits near a regional generation transition, however, entering the VIN into a fitment catalog is the safest move.

2024 Hyundai Kona Wiper Blade Size

This is where things become more interesting.

The 2024 Hyundai Kona belongs to the second-generation platform in North America, rather than the earlier body style. Hyundai's redesigned Kona reached North America for the 2024 model year.

Aftermarket fitment listings for the redesigned Kona commonly specify:

26-inch driver / 17-inch passenger.

Notice what changed?

The driver's blade remains approximately the same length, while the passenger blade grows by roughly an inch.

Don't Automatically Buy 2018–2023 Blades for a 2024 Kona

This is probably the biggest purchasing mistake we want to avoid.

You might be interested in this content.Hyundai Kona Gas Tank Size: Capacity, Range, and Fuel Guide

Searching simply for "Hyundai Kona wipers" may return first-generation products because those models have been on the road longer and generate plenty of marketplace listings.

Always include the model year.

Better yet, use a retailer's vehicle-fitment selector.

2025 Hyundai Kona Wiper Blade Size

For the 2025 Hyundai Kona, many current aftermarket fitment listings continue using the redesigned-generation front arrangement of approximately:

26-inch driver / 17-inch passenger.

Retail catalogs also list dedicated driver/passenger and rear replacement products for the 2025 Kona, showing why shopping by exact vehicle fitment is preferable to buying a generic blade solely by length.

2026 Hyundai Kona Wiper Blade Size

The 2026 Hyundai Kona remains part of the second-generation family. Hyundai continued offering the Kona across gasoline and electric configurations for this model year.

Aftermarket products covering 2024–2026 Kona models commonly advertise a 26/17-inch front combination.

Because parts catalogs continue evolving for newer vehicles, we would still verify a 2026 blade using the manufacturer's current compatibility database before ordering.

Hyundai Kona Rear Wiper Blade Size

The rear blade is easy to overlook.

Until the first rainy highway trip.

Then dirty spray coats the rear glass, visibility disappears, and that tiny rear wiper suddenly feels like the hardest-working piece of rubber on the vehicle.

For many 2018–2023 Hyundai Kona models, an 11-inch rear wiper is commonly specified by replacement catalogs.

Rear blades frequently use special connectors and molded assemblies rather than the universal hook-type fittings commonly encountered up front.

Why Rear Wiper Fitment Can Be Tricky

Two rear blades can both measure 11 inches but use completely different mounting systems.

This is why buying a "universal 11-inch wiper" is riskier than selecting a product specifically listed for the Kona.

The connector matters just as much as the rubber strip.

Hyundai Kona Wiper Blade Size in Millimeters

Some markets list wiper blades in millimeters rather than inches.

For the common first-generation setup, the approximate conversions are:

Position	Inches	Approximate Millimeters
Driver	26"	650 mm
Passenger	16"	400 mm
Rear	11"	280 mm

A replacement listing specifically identifies the first-generation Kona dimensions as 650 mm driver, 400 mm passenger, and 280 mm rear.

For a 17-inch passenger blade, we're looking at approximately 430 mm.

How to Find Your Kona's Wiper Size Yourself

Suppose we don't trust a website chart.

Fair enough.

There are several ways to confirm the correct blade.

1. Measure the Existing Wiper

Measure from one end of the blade to the other.

Do not measure the wiper arm.

If the blade measures roughly 25.5 to 26 inches, it will normally be marketed as a 26-inch blade.

2. Check the Existing Blade

Some wiper manufacturers print the blade size somewhere on the frame or rubber assembly.

Look carefully near the connector.

3. Use the Vehicle VIN

A Hyundai dealer or parts catalog can identify components using your VIN.

You might be interested in this content.Hyundai Kona Oil Type: Complete Engine Oil Guide

This is especially valuable when your vehicle falls close to a production change.

4. Check a Manufacturer Fitment Tool

Most major wiper manufacturers allow us to enter:

• Year
• Make
• Model
• Sometimes trim or body style

That is safer than grabbing a blade from a shelf based solely on length.

How to Replace Hyundai Kona Wiper Blades

Hyundai's replacement procedures vary somewhat with model and blade design, but the general process is straightforward.

On newer Hyundai vehicles, the wipers may need to be placed in a service position before we can safely lift the arms. Hyundai's current owner-manual guidance describes switching the engine off and then holding the wiper control in the MIST position to move the wipers upward into a service position on applicable models.

Basic Replacement Process

1. Park the Kona and turn the vehicle off.
2. Move the wipers into the appropriate service position if required.
3. Carefully raise the wiper arm.
4. Locate the locking tab or connector.
5. Release the old blade.
6. Slide or rotate it away from the arm.
7. Attach the new blade until it locks securely.
8. Lower the arm gently onto the windshield.
9. Repeat on the opposite side.
10. Test the wipers with washer fluid.

Never Let the Bare Wiper Arm Snap Down

This deserves its own warning.

Once the blade is removed, the metal wiper arm is essentially a spring-loaded lever pointing at your windshield.

If it slips from your hand and snaps against the glass, it can potentially chip or crack the windshield.

Place a folded towel on the glass beneath the arm while working if you want an extra layer of protection.

How Often Should Hyundai Kona Wiper Blades Be Replaced?

There isn't a magical replacement date that applies to every vehicle.

Instead, blade life depends heavily on:

• Sun exposure
• Temperature
• Ice and snow
• Dust
• Road salt
• Frequency of use
• Windshield contamination
• Rubber quality

Hyundai maintenance guidance recommends replacing windshield wiper blades when they begin streaking or leave sections of the windshield uncleared.

Those symptoms are more useful than simply staring at the calendar.

Signs Your Kona Needs New Wiper Blades

Bad wipers usually announce themselves loudly.

Sometimes literally.

Streaking

Instead of removing water, the blade spreads it into thin lines.

It feels like trying to clean glasses with a greasy cloth.

Skipping or Chattering

The blade jumps across the windshield rather than moving smoothly.

This may indicate:

• Hardened rubber
• Dirty glass
• Contaminated blade edges
• Incorrect blade pressure
• Poor-quality replacement blades

Squeaking

A little noise on a nearly dry windshield isn't necessarily a problem.

Constant squeaking during rain is another story.

Unwiped Areas

If an entire strip of windshield remains wet after each pass, the blade may no longer conform correctly to the glass.

Visible Rubber Damage

Cracks, splits, tearing, bent frames, or rubber pulling away from the blade are obvious replacement signals.

Beam vs Conventional Wipers for the Hyundai Kona

Walk into an auto-parts store and we'll normally see several blade categories.

Which one should we buy?

Conventional Wiper Blades

Traditional framed blades are typically affordable and widely available.

They can perform very well when properly matched to the windshield.

Beam Wiper Blades

Beam blades use a flexible internal structure rather than a traditional exposed metal frame.

They generally provide consistent pressure across curved windshields and often perform well in winter because there are fewer exposed joints where ice can accumulate.

Hybrid Wiper Blades

Hybrid blades combine a framed structure with an aerodynamic outer cover.

You might be interested in this content.Ford F-150 Wiper Blade Size: Complete Year and Fitment Guide

Interestingly, Hyundai parts listings for earlier Kona production show both conventional and hybrid-related wiper components depending on configuration.

Which Is Best?

Rather than declaring one design universally superior, we'd prioritize:

correct fitment > connector quality > rubber quality > blade design.

A premium beam blade in the wrong size is still the wrong blade.

Can We Install Longer Wiper Blades on a Hyundai Kona?

We wouldn't recommend casually upsizing.

A longer blade sounds attractive because it seems like it should clear more glass.

But wiper systems are engineered around specific sweep patterns.

Going too long can cause the blade to:

• Strike windshield trim
• Contact the other wiper
• Lift away from curved sections of glass
• Add unnecessary load to the wiper mechanism
• Produce uneven wiping

Stick with the original fitment unless a reputable manufacturer explicitly lists another dimension as compatible.

Can We Use a Shorter Wiper Blade?

Technically, a shorter blade might attach and move.

But why voluntarily reduce the area of windshield being cleaned?

The driver's wiper exists to preserve visibility.

Saving a few dollars by shrinking the wiping area is rarely worthwhile.

Use the specified size whenever possible.

Does the Hyundai Kona Electric Use Different Wiper Blades?

Not necessarily.

First-generation Kona Electric replacement kits are frequently listed with the same 26-inch driver, 16-inch passenger, and 11-inch rear configuration associated with gasoline first-generation Kona models.

But we should never assume every EV and gasoline Kona across every market uses identical parts.

Generation and model year remain the best starting points.

The newest Kona is offered in multiple powertrain configurations, including electric and combustion-powered versions depending on market.

Why Correct Wiper Blade Size Matters for Safety

A windshield wiper is tiny compared with the engine, brakes, suspension, or tires.

Yet when rain turns the highway into a gray curtain, those two strips of rubber become our primary visibility system.

Incorrect blades may produce:

• Poor rain clearing
• Larger blind areas
• Excessive noise
• Windshield streaks
• Wiper-arm interference
• Reduced visibility at night

Rain mixed with glare from oncoming headlights already challenges our eyes. Smearing water across the windshield makes the problem worse.

Good wipers disappear from our attention.

Bad ones demand it every few seconds.

How to Make Kona Wiper Blades Last Longer

We cannot stop rubber from aging, but we can make life easier for it.

Keep the Windshield Clean

Road film sticks to glass and contaminates blade edges.

Wash the windshield regularly rather than relying exclusively on washer fluid.

Clean the Blade Rubber

A damp microfiber cloth can remove accumulated dirt from the wiping edge.

If the cloth comes away black, we've discovered why the blade was smearing.

You might be interested in this content.Ford Fiesta Wiper Blade Size: Complete Year-by-Year Guide

Don't Run Wipers Over Dry Dirt

Using wipers like windshield sandpaper is rough on both the rubber and glass.

Use washer fluid first.

Don't Use Wipers to Remove Ice

Frozen wipers should be freed manually before operation.

Forcing them across heavy ice can damage the blade or place unnecessary strain on the wiper system.

Inspect the Rear Blade Too

The rear blade often gets forgotten until the rubber is practically hanging off the arm.

Check it whenever inspecting the front blades.

Common Hyundai Kona Wiper Blade Buying Mistakes

The first mistake is buying by vehicle name alone.

"Hyundai Kona" is no longer enough because multiple generations exist.

The second is assuming both front blades have the same dimensions.

They don't.

The third is forgetting about the connector.

The fourth is assuming an aftermarket catalog can never be wrong.

And the fifth?

Opening the package before checking fitment.

Once we've installed or discarded the packaging for the wrong blade, returning it becomes much harder.

Best Way to Buy Hyundai Kona Wiper Blades

Our preferred process is simple:

Start with model year → confirm generation → check blade size → verify connector → confirm vehicle fitment.

For a 2022 Kona, we'd begin with the established first-generation 26/16/11-inch reference.

For a 2025 Kona, we'd start from the newer-generation 26/17-inch front reference, then verify the exact blade and rear fitment through a current compatibility catalog.

Five minutes of verification beats standing beside the car with a wiper blade that doesn't attach.

Hyundai Kona Wiper Blade Size: Final Thoughts

Choosing the right Hyundai Kona wiper blade size is easy once we stop treating every Kona as the same vehicle.

For most 2018–2023 Hyundai Kona models, the widely listed configuration is 26 inches on the driver's side, 16 inches on the passenger side, and 11 inches at the rear.

With the redesigned 2024 and newer Kona, many replacement catalogs specify 26-inch driver and 17-inch passenger blades.

The golden rule is simple: verify your exact model year before purchasing.

Wiper blades might be small maintenance items, but clear vision through heavy rain isn't small at all. The right blade should sweep quietly, hug the windshield evenly, and disappear from our thoughts—which is exactly what a good wiper is supposed to do.

Frequently Asked Questions

1. What size wiper blades does a 2018 Hyundai Kona use?

A 2018 Hyundai Kona is commonly listed with a 26-inch driver's blade, 16-inch passenger blade, and 11-inch rear blade. A dedicated 2018 fitment listing confirms this combination.

2. What size wiper blades does a 2023 Hyundai Kona take?

The commonly listed 2023 Hyundai Kona sizes are 26 inches for the driver, 16 inches for the passenger, and approximately 11 inches at the rear. Replacement kits covering the 2018–2023 Kona use this configuration.

3. What size wiper blades does a 2024 Hyundai Kona use?

The redesigned 2024 Kona is commonly listed with 26-inch driver and 17-inch passenger front wipers by current aftermarket fitment catalogs. Because the 2024 model begins a new Kona generation in North America, owners should not automatically buy blades marketed for 2018–2023 vehicles.

4. How do I know whether a wiper blade fits my Hyundai Kona?

Check the model year, blade length, and arm connector, then confirm the replacement through a vehicle-specific fitment catalog or VIN lookup. Blade length alone does not guarantee compatibility because different attachment designs may be used.

5. When should Hyundai Kona wiper blades be replaced?

Replace them when they begin streaking, skipping, leaving unwiped sections, making persistent noise, or showing visible rubber damage. Hyundai maintenance guidance specifically recommends replacement when blades streak or fail to clear sections of the windshield properly.

You might be interested in this content.Hyundai Palisade Wiper Size: The Complete Easy Guide